Modding Whiplash/Fatal Racing

From The /ovg/ Wiki
Revision as of 02:19, 29 March 2024 by Aspirations (talk | contribs)
Jump to navigation Jump to search

Track (TRK) files

The tracks.

Definition

Header
Empty line
Empty line
Geometry
Signs
Empty line
Stunts
Empty line
Textures
Empty line
Race info
Empty line
  • // denotes a single line comment
  • integer values are 32-bit signed integers
  • floating point values are double precision

Header

Geometry length
int		 0 0 Distance between track and floor
int

Geometry

Track geometry.

Left shoulder width
int 		Left lane width
int 		Right lane width
int 		Right shoulder width
int 		Left shoulder height
int 		Right shoulder height
int 		Length
int 		Yaw rotation, counter-clockwise (°)
float 		Pitch rotation, upwards (°)
float 		Roll rotation, counter-clockwise (°)
float 		AI line
int 		AI line
int 		AI line
int 		AI line
int 		Track grip
int 		Left shoulder grip
int 		Right shoulder grip
int
int
int
int
int
int
Left surface type
int 		Center surface type
int 		Right surface type
int 		Left wall type
int 		Right wall type
int 		Roof type
int 		Left upper outer wall type
int 		Left lower outer wall type
int 		Outer wall floor type?
int 		Right lower outer wall type
int 		Right upper outer wall type
int 		Environment floor type
int 		Building/Sign type
int 		Building/Sign horizontal offset
int 		Building/Sign vertical offset
int 		Building/Sign yaw, counter-clockwise (°)
float 		Building/Sign pitch, upwards (°)
float 		Building/Sign roll, counter-clockwise (°)
float
Left upper outer wall angle?
int 		Left lower outer wall angle?
int
int
int 		Right lower outer wall angle?
int 		Right upper outer wall angle?
int 		Left upper outer wall height
int 		Left lower outer wall height
int
int
int 		Right lower outer wall height
int 		Right upper outer wall height
int 		Wall/roof height
int 		Draw order?
int 		Draw order?
int 		Draw order
int
int
int
int
int
int
int
int
int
int
int
int
int
int
int
Empty line
...

Surface type bit flags

Least significant bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Surface type Wall
(cannot be
driven on) 		Bounce off walls Echo Pit Yellow on
track map		 Wall
(cannot be
driven on) 		Transparent
Requires no texture 		Bounce off walls Non-magnetic Flip vertically Non-solid Texture pair Flip horizontally Partial transparency Apply texture Texture
  • Partial transparency
    • Toggles transparency on textures that contain transparent sections, e.g. guardrail
    • Turns palette texture index 0 transparent (#000000) (not to be confused with the same color at another index)
  • Texture
    • Transparent
      • Setting bit 0 makes it darker?
    • Single
      • Bits are just texture index
    • Pair
      • Bits are texture index of left, index+1 on right
    • When apply texture not set
      • Bits indicate a solid color corresponding to the index within PALETTE.PAL

These apply for road surface, wall/roof, and outer wall/floor.

Building/Sign type

Value Name Description Requires apply bit? Texturing
0 TOWER tall box Yes Index
1 TOWER 2 tall box, different texture No Fixed (22)
2 SIGN 1 small, back upside down, on one leg Yes, but not for legs Index, legs fixed (20)
3 SIGN 2 small, back upside down, on two legs Yes, but not for legs Index, legs fixed (21)
4 BUILD complex building, drawn differently, different texture No Fixed (20, 21)
5 BUILD 1 giant tall folded boxes, different texture No Fixed (0)
6 BUILD 2 more giant tall folded box, different texture No Fixed (20)
7 BUILD 3 WIDE short box Yes Index
8 HEELBAR cube, different texture No Fixed (8)
9 BALLOON flat square, always face camera Yes Index
10 TREE flat skinny rectangle, always face camera No Fixed (1)
11 ADVERT flat small square, fixed, same back Yes Index
12 ADVERT 2 fixed flat square, back upside down Yes Index
13 QUAD BLD 4 tall skinny boxes No Fixed (23, 24, 25, 26)
14 BLD 0 tall box with pyramid top, different texture No Fixed (20, 21)
15 BIG BALL flat square, always face camera, larger than BALLOON Yes Index
16 BIG AD fixed flat square, back upside down, smaller than ADVERT 2 Yes Index
>=256 no idea

Textures are determined by BLD file.

  • Index: first 9 bits work just like road textures
  • Fixed: Same texture is always applied (index in parentheses)

Shoulder height

  • >0: up
  • 0: flat
  • <0: down

AI line

  • >0: left
  • 0: center
  • <0: right

Grip

  • 0: full grip
  • 12: ice

Wall type

  • Left and right must exist to draw roof

Outer wall floor type?

  • -2: outer walls even with shoulder, normal solid wall
  • -1: no outer walls, can fall off
  • >=0: texture indexing with 9 bits as usual, moves walls below track and applies to floor, can drive partially off shoulder and bounce off

Building/Sign offset

  • >0: left/up
  • 0: center
  • <0: right/down

Outer lower/upper wall angle?

  • Not the actual walls
  • >0: outward
  • 0: vertical

Draw order?

These three values seem to combine to determine whether track is visible through other track. For example, given Bonus 4 with a bunch of buildings/signs over transparent track with transparent track on the other side, when the third value is 0, no buildings/signs are visible. When said value is greater than 0, some buildings/signs are visible. Changing the value or the values of the other two may change which buildings/signs are visible.

Third row

These properties only ever have these values over all 11018 geometry segments of the retail tracks.

Property index Values
16 20,40,60
17 20,40,60,80
18 20,40
19 20
20 20
21 20,40,60,80
22 1
23 20
24 1,20,40
25 20
26 1

Signs

Empty on some tracks.

Signable geometry index
int		 Texture
int
...
-1 -1
  • Signable geometry index
    • 0: first geometry section with 0 <= sign type < 256
    • 1: second, etc
  • Texture
    • Bits 0-7: index in BLD texture file
    • Bit 8: apply texture
    • Bit 15: invisible
    • No other bits seem to have an effect

Stunts

Controls geometry that moves and potrudes. Empty on some tracks.

Geometry index
int 		Scale factor?
int 		Angle?
int 		?
int 		Timing group
int 		Height
int 		Time bulging
int 		Time flat
int 		Smaller expands/larger contracts?
int 		Bulge?
int
...
-1
  • Scale factor?
    • Increases the length and height of the "ramp"
    • 1 is a bump, 4 starts breaking textures, 6 is huge vertical wall
  • Angle?
    • Lower is flatter, higher becomes trapezoid with longer top
  •  ?
    • No clue
  • Timing group
    • With otherwise identical config, two bumps with same number move together, with 1 and 2 move oppositely

Textures

Texture file
TEX:<DRH file>
Building/Sign texture file
BLD:<DRH file>
BACKS:
Geometry index
int		 Texture
int
...
-1

Backs

The outside texture of walls when there is a wall between the track and the shoulder. There must be some kind of flag as it is not always displayed.

Race info

Not present on some tracks.

Track number
int
Impossible laps
int		 Hard laps
int		 Tricky laps
int		 Medium laps
int		 Easy laps
int		 Girlie laps
int
Track map size, smaller is larger
float		 Track map fidelity, smaller is more accurate
int
float

Effects

Bonus 7

  • Swapping yaw and pitch: loop
  • Swapping yaw and roll: twisting line
  • Swapping yaw and pitch, roll 90.00000: vertical ring to the left
  • Negative yaw: turnright

Length

Given Pulse at its maximum 193 mph on a modified Bonus 4 where all 494 sectors are 1200 long can complete at lap in 28.36 seconds and on the same track but with 50 flat sectors on each side shortened to 100 can complete a lap in 27.41 seconds, 1000 length units is equivalent to 13.45 ft or 4.10 m. Additionally, the rotated portions of the track contribute approximately 0.20 seconds extra compared to flat.

Palette (PAL) files

Texture color palettes.

PALETTE.PAL

Index 0x00 may be treated as having a fully transparent alpha (RBGA #00000000). All other colors are fully opaque, including the other black at index 0x70 (RBGA #000000FF).

0 1 2 3 4 5 6 7 8 9 A B C D E F
0x
1x
2x
3x
4x
5x
6x
7x
8x
9x
Ax
Bx
Cx
Dx
Ex
Fx
Retrieved from "http://wiki.get-good.net/index.php?title=Modding_Whiplash/Fatal_Racing&oldid=1893"